The fully automated Ocean Boat Bilge water pump, is a powerful pump made to remove water from your boat, quickly.
The fully automated Ocean Boat Bilge water pump, is a powerful pump made to remove water from your boat, quickly. It is an all-in-one pump and switch system, that saves installation time and space in the bilge.
The wire lead is 1 meter, and the outlet diameter is 29mm and width 81mm.
The bottom base is blue and has a built-in float switch. Along with this pump, equipped is an integrated electronic controlled sensor system, for automatic operation to power on when the water level rises. The total weight is approximately 480 gr.
It’s made of the stainless steel shaft to protect against water and corrosion damage. The maintenance is quite easy, with the quick release restrainer, pop it open.
The product has water and moisture tight seals along with anti-airlock protection. It’s also got a water-cooled system so that the motors won’t overheat under any circumstances.
Technical Characteristics
- Completely submersible
- Efficient long life motor
- Eco friendly
- Easy clean, snap lock strainer base
- Silent operation, without vibrations
- No separate float switch required
Code | Output | Supply | Current | Head | Dimensions | Connection |
01813-110012 | 1100 GPH / 69.2 LPM | 12V | 3.8A | 5 m | H108 x W90.7 mm | 29 mm |
01813-60012 | 600 GPH / 37.8 LPM | 12V | 2.5A | 2.5 m | H108 x W90.7 mm | 19 mm |
01813-75012 | 750 GPH / 47.3 LPM | 12V | 3.0Α | 3.0 m | H108 x W90.7 mm | 19 mm |