The SEAFLO 12V Series 41 Diaphragm Water Pressure Pump, is a general-duty positive displacement pump.
The SEAFLO 12V Series 41 Diaphragm Water Pressure Pump, is a general-duty positive displacement pump. Typical applications include: Marine, RV, Agricultural Spraying, General Industrial, Filtration, Beverage Processing, Solar Water System
Thanks to the quad chamber diaphragm and internal bypass, the 41-Series pump provides high volume water flow with reduced pump cycling.
It excels in providing high-water flow - up to 4.5 gallons per minute - with moderate pressure and is suitable for all activities needing these requirements. These models are designed to run on water systems with up to 5 outlets and no accumulator tank. It is also suited for use with a holding tank water system, as may be found in a boat, RV or remote cabin.
The 41-Series pumps are self-priming, and can run dry without damage.
It also features a built in pressure switch, allowing the unit to start and stop when it detects a faucet being opened. These pumps are supplied with 12mm and 19mm fittings. They're easy to install service and winterize with quick snap-in port fittings.
Technical Specifications
- Positive Displacement Pump
- Run-Dry capable
- Quiet operation
- Pressure detection (On demand switch), as well as a bypass mode
- Low amp draw
- Industry mounting pattern
- Thermally protected
- 12V
- Model SFDPA1-033-035-41
- Open Flow: 12.5 Lt/Min
- Control Type: Demand & By pass
- Max Draw: 1.25 A
- Shut-off Pressure: 35 PSI / 2.4 BAR
- Max Temperature: 60°C
- Weight: 2.18 kg
- Suction Lift: 1.8m
- Max Pressure: 40PSI (2.8 Bar)
- 1/2"-14 MNPT Inlet/Outlet ports
- Intermittent Duty
- Leads: 16AWG, 1.3m (4.5ft) long leads with 2-pin connector
- Valves: EPDM
- Diaphragm: Santoprene