The Railblaza G-Holds can hold various sizes of poles, tools and bundles, like fishing rods, shovels, boathooks, grubbers, electric fence standards, oars, paddles, spearguns, etc. depending on the width of the opening.
The Railblaza G-Holds can hold various sizes of poles, tools and bundles, like fishing rods, shovels, boathooks, grubbers, electric fence standards, oars, paddles, spearguns, etc. depending on the width of the opening.
The 35mm is recommended for the use of rods, landing nets, gaffs and anything of moderate size up to 13/8 inches.
The flexible quick-release strap has two securing points for the security of minimum and maximum diameters, providing strong retention. The G-Hold strap has rungs with which to set the tension of each G-Hold firmly.
While G-Holds are supplied in singles, it is recommended to use two for long-spanning objects, similar to molded rubber or folding paddle clips. During installation, make sure the G-Holds are parallel when mounted in pairs.
When fitting to a StarPort on a vertical surface, make sure the longer arm is positioned at the bottom because this provides extra support before tensioning the strap in place.
All G-Holds install in any Railblaza base (not included).
Sizing: 35mm (13/8 inches).
Features tension setting rungs.
Sold in singles, while two are recommended for linear use on longer accessories.
Base not included.
Railblaza Part Number 02-4026-11 G-Hold 35mm (13/8″).
Download here the Mechanical Drawing.