The Blue Sea Systems, m-Series Battery Switch, switches, or isolates a single battery, to a single load group.
The Blue Sea Systems, m-Series Battery Switch, switches, or isolates a single battery, to a single load group.
It is equipped with one-piece, Tin-plated copper studs, which never loosen over time and provide maximum conductivity and corrosion resistance. Studs accept 3/8" (M10) ring terminals.
Comes with an isolating cover, with three snap-off side pieces protects rear contacts and allows wire access in any direction.
The Blue Sea Systems Battery Switch 6006 is intended to keep a load from discharging the battery system. The battery system is used for vital loads like engine starting.
Download here the Mechanical Drawing.
Download here Technical Sheet.
Download here the Manual.
Technical Characteristics
- Ignition protected - safe for installation aboard gasoline powered boats
- Case design allows surface, front panel, or rear panel mounting
- Isolating cover, with snap-on sections, protects rear contacts
- Cranking Rating: 30 sec. 900A DC (Τhe current required by the starter circuit prior to engine starting. Initially, there is a large surge of current required to overcome the inertia and compression of the engine. This surge can be two to four times the average cranking current.)
- Intermittent Rating: 5 min. 500A DC (The maximum amount of current a switch is designed to carry for a minimum of a designated period of time)
- Continuous Rating: 300A DC (The maximum current a switch is designed to conduct for an indefinite period)
- Terminal Stud, Tin-Plated Copper 3/8”-16 (M10)
- Cable Size to Meet Ratings: 4/0 AWG (120 mm²)
- Maximum Voltage Rating: 48 Volts DC
- Switch Type: Single Circuit ON – OFF, Switches a single battery to a single load group
- Color: Red
- Switch Positions: 2
- Battery Combine: No
- Battery Inputs: 1
- Stud Material: Tinned Copper
- Weight: 0.29 kg
- Product Code: 6006