Teak Cleaner & Brightener Teak Wonder

Teak cleaning is normally a problem that is often solved by drastic methods, such as sanding, or the use of powder, or extremely caustic detergents which will eventually severely damage the surface.

The Teak Wonder® Combo Pack is a complete kit for cleaning Teak areas. The kit contains one litre bottle of Teak Wonder® Cleaner and one litre bottle of Teak Wonder® Brightener to perform the complete cleaning cycle. The bottles are equipped with a handy cap/pourer that allows easy use of the products, avoiding waste.

Teak Wonder® Cleaner is a powerful cleanser that thoroughly cleans the teak easily and with very little effort, without the need for sanding. The product is neither caustic, nor aggressive and will not damage rubber seals, paint, or hardware. The grey oxidisation and dirt are removed in a few minutes.

The cleaning process is carried out by wetting the surface to be cleaned thoroughly with fresh water, then apply the cleaner evenly and brush the deck with a soft bristle brush, across the grain (do not apply too much pressure, this avoids damaging the teak fibres).  Rinse the soapy solution off, with plenty of fresh water and do not allow the wood to dry prior to starting the brightening process.

On heavily soiled surfaces, which have significant oxidisation, or have not been cleaned for a long time, a second cleaning may be necessary before starting the brightening process.

Carefully wash away any product left on non teak surfaces.

The coverage is approximately 6-8 m2/Ltr (depending on the condition of the wood).

Instructions

1. Soak teak with fresh water.
2. Thereafter apply Teak Wonder® Cleaner directly on the surface evenly and generously.
3. Brush the teak with a soft scrub brush in the direction of the wood grains. Do not allow it to dry. Add small amounts of water if necessary. Brush until clean, rinse thoroughly.
4. If a lighter, brighter color of teak wood is preferred, apply Teak Wonder® Brightener as directed, while teak is still wet or after having wet it again.

Teak Wonder® Cleaner does not harm most marine paints, varnishes, fiberglass or aluminum alloys. Due to varied formulas of paints, varnishes, etc., we recommend avoiding contact with these surfaces to prevent possible damage.

Do not mix Teak Wonder® Cleaner & Brightener.

Teak Wonder® Brightener is a lightening process used to eliminate shading from the teak which may still persist even after the application of the Teak Wonder® Cleaner. The application of Teak Wonder® Brightener is not always necessary, but when used on aged surfaces it has an effect that seems miraculous: the teak immediately regains its natural color (like newly sanded but without removing precious layers of grain).

The brightening process should be carried out on a wet surface, ideally straight after cleaning. Apply Teak Wonder® Brightener sparingly and evenly to avoid a patchy result then wash the deck.

The effect of the Teak Wonder® Brightener, is immediate and the result instant. As with the cleaner, rinse away the solution with plenty of fresh water. The product is neither caustic nor aggressive, and will not damage rubber seals, paint or hardware. 

Carefully wash away any product left on non teak surfaces.

The coverage is approximately 8-10 m2/ltr (depending on the condition of the wood).

Instructions

• Abundantly wet with fresh water the teak after it has been cleaned with Teak Wonder® Cleaner. Thereafter apply Teak Wonder® Brightener directly on the surface evenly and generously.
• This product may be applied with a sponge, swab, or deck brush.
• The teak it will clear up instantaneously. Immediately rinse abundantly, don’t let the product dry on the surface.

Teak Wonder® Brightener does not harm most marine paints, varnishes, fiberglass or aluminum alloys. Due to varied formulas of paints, varnishes, etc., we recommend avoiding contact with these surfaces to prevent possible damage.

Do not mix Teak Wonder® Cleaner & Brightener.