Titan Yate Antifouling Stripper

Titan Yate is a water-based antifouling stripper. It easily removes with water pressure, or putty-knife (no need to sand) old antifouling coats (in poor condition) on polyester, wood, iron, aluminium surfaces etc.

Titan Yate does not damage the gel-coat (polyester) even though it is advisable to protect with adhesive tape the area that limits the non-submerged surface and the floating line.

Technical Characteristics

• Application: Brush, Roller
• Coverage: 3 - 5 m² /Lt. depending on the thickness of the applied antifouling
• Thinner: Water
• Available in 750ml & 4 Lt

Usage Instructions:

• Apply a thick layer of Titan Yate Stripper over the old antifouling kai wait for 2 hours.
• Apply a second coating and let it work for 24 hours
• Remove the old antifouling along with the antifouling stripper with a water pressure gun
• Wash off the boat's keel, let it dry and then continue with applying antifouling and paint.