The Euromeci Internal Sealant, eliminates micro-leaks from inflatable boats.
The Euromeci Internal Sealant, eliminates micro-leaks from inflatable boats.
It consists of a specially developed solution which, when injected through the valves, in the chambers of inflatable boats, seals the porosity of the fabric and repair small leaks, that are inaccessible from the outside and cannot be repaired with conventional means. It is able to seal small holes, caused by curls, nails, sea urchins, needles and sharp objects, up to 3mm in diameter and porosity due to aging.
However, it is sound practice to repair any obvious tears, or punctures with patches using the dinghy manufacturers’ recommended adhesives and to check that valves are not leaking air, before using the Euromeci Internal Sealant. It may be used on dinghies of all ages, even the ones that do not yet suffer from porosity in order to reduce the likelihood of this occurring.
Available in 1 liter container. 1 liter is enough for a boat up to 3 meters length.
Download here the products brochure.
Usage Instructions:
- First deflate the boat, to two thirds of its standard pressure
- Inject the product with the syringe that is included, through the valve into the inflatable chambers
- Immediately after, roll over the boat, so that the material is distributed almost throughout its length.
- Leave to get dry for a few hours rolling over the boat every 30 minutes.
- Inflate the boat at its standard pressure.