Speargun Meandros B-32 Naked

The B-32 is the robust and the more evolved line of spearguns, that company Meandros has to offer, that responds to the needs of demanding spear fishing hunters, looking for something more advanced than simple tubular spearguns.

Particular attention has been paid by Meandros to all the parameters, that make up a quality product, that is easy-to-use and offers unprecedented ballistic performance. The Meandros B-32 has been studied to overcome the problems and weaknesses of common aluminum, or carbon tubular spearguns, such as the intense recoil, deformations, buoyancy and offers long-lasting reliability and excellent operation of all its mechanical parts, etc.

The Meandros B-32 speargun consists of the international, most advanced ergonomic Leader handle, with a particularly low profile, a non-slip, anatomic grip, arming heel, reduced friction spear guide, water balance compartment, ambidextrous monofilament guide (line release), multi-purpose bore, etc.

It also includes the most advanced design of inverted, full inox, heavy duty trigger mechanism, with minimal weight and sensitivity. The trigger mechanism extends the loading length by +9.5 cm and has an ambidextrous mechanical side, fully functional line release. A milestone and benchmark is the revolutionary Pin Roller System (upon request), as it offers reduced friction, with zero wear at the point of contact with the bar, but also distributes the load received from the bar at 3 separate points. Two contact points at the housing and one point at the hook, which now accepts a small part of the pressure exerted and not 100% of it. The hook now has much lower pressure at the point of contact with the trigger, therefore the pressure exerted on the trigger to release the shaft, is much less than a classic type reverse mechanism.

The angle of inclination of the oval hole, which slides inside the engagement shaft, reduces and reverses the torque, by determining the pressure load to be applied to the trigger. The strong negative inclination of the oval hole, can even reset the applied pressure on the line release extension, exercised on the trigger. This system gives us the advantage of simplifying the construction without compromises and sacrifices on the trigger sensitivity, an issue caused by the pressure load at the point of contact, with the engagement hook and thus bypasses disadvantages of more complex systems, with roller bearings contact with the trigger and with additional components used in the assembly and operation intended regarding the trigger sensitivity of the mechanism.

The multiple sided tubular barrel of the Meandros B-32, is made of aluminum alloy, with an integrated trapezium shaped, hydroplaning guide, which delivers stiffness, with a minimum weight of positive buoyancy of +4.16 gr / cm.

The Speargun Meandros B-32 offers full anodized protection. The thickness of the barrel wall for greater rigidity, is uneven (1.50mm – 2.1mm depending on the stress point) overcoming the rest of circular tubes one might find in the market. Stiffness coupled with the absence of recoil, achieves shot precision and top ballistic performance at a distance from the tip of the spear to 5 times the length of the barrel. Much of the energy from the bands to the rod, is absorbed and is lost in the recoil when the mass of the barrel and gun is disproportionate to the setting. The B-32 Speargun is sturdy and robust and guarantees rigidity, with minimal energy loss from recoil. Similar shooting performance cannot be obtained from a common barrel of 28 x 1mm aluminum, or carbon 30 x 2 mm. In order to maintain stiffness outside of barrel too, attention has been given to the grip / muzzle attachment points of the barrel, in terms of geometry and static materials, so that at high load the deformation at the connection points is almost zero.

The open type 2 hole muzzle has a particularly elegant hydrodynamic design, that makes the movement of the gun to any direction, a simple and easy task. The double bands can be adjusted in a different position and length, to contribute to the agility, responsiveness and avoidance of vibration or friction between them. The trapezoid shaped spear guide contacts the spear at 3 points, giving hydro-reduction with reduced friction.

The Speargun Meandros B-32 features a strong line guide, that "hugs" the thread into the body of the muzzle, while preventing jams and oscillations during unwinding and movement, while keeping the rope always close to the barrel body and preventing uncontrolled flow. The Bungee hole is also positioned to prevent jams, oscillations at the line by bringing the bungee to the barrel’s side line, where it works perfectly in harmony with the trigger mechanism and the muzzle line guide.

The base of the Meandros B-32 speargun can fit all the Meandros reels.

It is produced in the following lengths: 85, 95, 105,115, 130 cm.

Technical Characteristics

• Tube Material: Aeronautical Aluminum Alloy
• Tube Internal Dimensions: 29mm
• Tube External Dimensions: 32mm
• Tube Cut Shape: Round with supporting extensions / Multiple Sides
• Wall Thickness: 1.5mm. – 2.1mm
• Buoyancy: +4,16 gr / cm
• Ballasting: Yes
• Rail Type / Length: Trapezium / 16mm from center
• Pipe Protection: Fully Anodized
• Color: Black Mat
• Handle: Leader – B-32
• Handle Profile: Extremely Low
• Mechanism: Inverted, Full Inox, Heavy Duty (Pin Roller System Upon Request).
• Line Release: Ambidextrous Horizontal
• Handle adjustment in the pipe: Male
• Sealing: With O-Rings 20 x 4.5 / Test 10 bar.
• Grip: Ambidextrous, Anatomic, Non-slip, Detachable
• Safety: Recessed in the trigger guard
• Loading Pad: Anatomical with excellent line sight
• Muzzle: B 32 / ID 29
• Muzzle Type: Open for 2 Circular  Bands