- New
Meet the newly redesigned 30Amp 12V/24V Power Queen MPPT Charge Controller. This smart charge controller has a built-in Bluetooth Module.
Meet the newly redesigned 30Amp 12V/24V Power Queen MPPT Charge Controller. This smart charge controller has a built-in Bluetooth Module. Users can monitor and adjust their solar system straight from their phones. The Power Queen MPPT Charge Controller was also built tough with a die-cast aluminum exterior which allows for safe heat dissipation and general protection from wear and tear.
Considering the high tracking efficiency of the innovation MPPT technology of up to 99% and the peak conversion efficiency of 98%, the Power Queen MPPT charge controller can Track the maximum power point of arrays to get the most power to charge the battery and loads. It improves the energy utilization ratio by 15% to 20% compared to traditional PWM controllers.
The Power Queen MPPT 12/24V 30A solar charge controller with Bluetooth module, includes an LCD screen and multiple LED indicators, and it’s intended to display information about system operation, customizable parameters, and error codes. It includes a Bluetooth adaptor with an RJ12 port and can be used with the integrated RS232 communication protocol to remotely monitor the real-time status of the solar panel, battery, and loads.
The Power Queen 12/24V 30 Amp MPPT Charge Controller was conceived in response to the widespread demand from lithium battery users, for a dedicated LiFePO4 battery controller. It's intended for LiFePO4 batteries, with a 12V LiFePO4 default setting, but it's also adaptable to Gel, Sealed, Flooded, and Lead-Acid batteries by manually setting it.
The use of die-cast aluminum heatsink increases the efficiency of heat dissipation, which reduces power loss due to heat. And it can work in a temperature range of -35°C to 45°C at full load. Overvoltage, overpower, short circuit, reverse polarity, reverse charging and overtemperature protection are integrated and ensure comprehensive protection from the solar modules to the load connection.
Power Queen MPPT charge controller offers the most comprehensive installation accessories for setting up a solar charging system. It saves you time searching for the right accessories, allows you to complete the installation when you receive the package and get ready for the solar power system.
Download here the Product Manual.
Technical Characteristics
- Rated Charging Current: 30A
- System Voltage: 12V(Default) / 24V / Auto
- Rated Load Current: 20A
- Battery Voltage: 9V to 35V
- Operating Temperature: -31°F to 113°F / -35°C to 45°C
- Max. Power Point Voltage Range: Battery Voltage +2V to 75V
- Conversion Efficiency: ≥98%
- Max. Solar Input Voltage: 100V(77°F / 25°C) / 90V(-13° F / -25°C)
- PPT Tracking Efficiency:>99%
- Max. Solar Panel System Input Power: 400W for 12V / 800W for 24V
- Communication Method: RS232
- Temperature Compensation Factor: -3mv/°F or °C / 2V (Default)
- Weight: 4.41lb / 2kg
- Temperature Sensor: Only for Lead-Acid battery
- Dimensions: L6.81*W2.85*H9.37inch / L173*W72.5*H238mm
- Exclude
- 1